­

Potential to Emit (PTE) Tank Battery Vapor Testing

There are many ways to determine a facility’s (e.g. storage vessel, separator) flash emission rate but only a few do it with scientific precision. Simulation software is a great means to predict flash emission rates from various facilities found in the process stream and has proven to be very accurate, but it is still not [...]

By |September 22nd, 2014|Categories: Air Quality, Compliance, OTA Service|Comments Off on Potential to Emit (PTE) Tank Battery Vapor Testing

VRU: Pressure Sensor Placement

Vapor Recover Units must have sensing equipment which enables the applicant to know that the VRU is capturing vapors at peak intervals. An example of this would be a pressure sensor, which senses the pressure of the vapors in the tank and communicates it to the VRU compressor to turn on, meaning to start drawing [...]

By |September 12th, 2014|Categories: Compliance, Vapor Recovery|Comments Off on VRU: Pressure Sensor Placement

OTA Industry leads in more than just providing equipment and support! Come hear our company leaders speak!

OTA specializes in the service and supply of many production sites by providing vapor recovery units, vapor recovery towers, combustors, well head compression and testing to make sure you are capturing your maximum revenue and remain in compliance with EPA, State, and Local air quality regulations. While providing all of these tools to help your [...]

By |September 2nd, 2014|Categories: Air Quality, Compliance, OTA Service|Tags: , , |Comments Off on OTA Industry leads in more than just providing equipment and support! Come hear our company leaders speak!